Вие сте тук » Ubiquiti EdgeMAX
Ubiquiti EdgePoint 6
Производител: Ubiquiti
212.00 лв.
без ДДС

EdgePoint R6 (EP-R6)

The EdgePoint, part of the EdgeMAX platform is the first application-specific designed WISP control point. The EdgePoint combines EdgeMAX routing features with fiber backhaul and versatile powering capabilities. The EdgePoint features FiberProtect to significantly reduce electrostatic discharge (ESD) failures and electromagnetic interference (EMI), greatly improve data signal integrity, and consolidate the wired data backhaul to a single fiber cable run for long-distance connectivity. A single, compact controller efficiently eliminates clutter, expensive cabinets, extraneous installations, and excessive maintenance. The ruggedized case withstands outdoor conditions, including wind, rain, and snow. The included cable sleeve protects the cables and cable opening. If you prefer, you can swap it out for your own conduit. For the EP-R6, powerful routing features - such as load balancing and failover - provide redundancy and increased performance for outdoor wireless links. Powered by 24VDC or by PoE, the EP-R6 can support 24V passive PoE to power most Ubiquiti products. The EP-R6 offers robust features, including:
  • VLAN interfaces for network segmentation
  • Static routes and support of routing protocols: OSPF, RIP, and BGP
  • Firewall policies and NAT rules
  • Application identification with Deep Packet Inspection (DPI)
  • DHCP services
  • Quality of Service (QoS)
  • Network administration and monitoring tools
  • Administrator and operator accounts
  • Comprehensive IPv6 support
  • Dimensions 188.6 x 177.1 x 49.8 mm (7.43 x 6.97 x 1.96")
    Weight 605 g (1.33 lb)
    Max. Power Consumption 7W (Excludes PoE Output)
    Power Input (1) DC Terminal Block 
    (1) RJ45 (eth0) 
    (Self-Correcting Polarity Protection on DC Terminal Block Only, 
    Diode ORed Protection on All Power Inputs)
    Power Supply Min. 24V / 0.3A (Excludes PoE Output Power)
    VDC Input 24V, 3A
    Passive PoE Input (1) 24V / 1.4A, 4-Pair (+1, 2, 4, 5; -3, 6, 7, 8) Passive PoE, eth0 
    (Do NOT Configure eth0 in PoE Output Mode 
    if You Are Using a PoE Input Power Source.)
    Passive PoE Output (5) 24V / 0.7A, 2-Pair (+4, 5; -7, 8) Passive PoE, eth0 to eth4
    Power Monitoring (1) DC Terminal Block, Input Power 
    (1) RJ45, eth0, Input Power
    Supported Voltage Range 26 to 16VDC
    Button Reset
    System Power
    eth0 to eth4 Speed/Link/Activity, PoE
    eth5/SFP Speed/Link/Activity
    Data Ports (5) 10/100/1000 RJ45 Ports 
    (1) 1 Gbps SFP Port
    Processor Dual-Core 880 MHz, MIPS1004Kc
    System Memory 256 MB DDR3-1600 RAM
    Code Storage 256 MB NAND
    Certifications CE, FCC, IC
    Pole Mount Yes
    Operating Temperature -20 to 65° C (-4 to 149° F)
    Operating Humidity 10 to 90% Noncondensing
» EdgePoint_DS.pdf