Ubiquiti Nano Beam M5 Airmax 19db
»» Промоционална цена
NanoBeam M5 AirMAX 19 dBi is powerfull all-in-one outdoor unit including 2x 19dBi MIMO antennas for 5GHz band, suitable for PtP connection. Real throughput is up to 300Mbps. For high speed transmission unit uses standard 802.11n and also AirMAX (TDMA) technology to connect to AP with low latency.
Improved Noise Immunity
The NanoBeam directs RF energy in a tighter beamwidth. With the focus in one direction, the NanoBeam blocks or spatially filters out noise, so noise immunity is improved. This feature is especially important in an area crowded with other RF signals of the same or similar frequency.
The Ubiquiti Research and Development team combined the radio and antenna to create a more efficient and compact CPE. The NanoBeam gets maximum gain out of the smallest footprint. Providing increased performance from its faster processor and innovative mechanical design at a low cost, the NanoBeam is extremely versatile and cost-effective to deploy.
Web-based configuration is very simple and clear. Can be set as:
AP mode, client or WDS
between WAN and LAN routing and transparent bridge, with or without NAT
signal strength, which is suited to the specific LED indicator
output power up to 26 dBm
In bridge and WDS mode device supports transparent transmission IPv6.
Included is a 24 V PoE power source, which contains the reset button for putting device to TFTP firmware recovery mode.
Transmission speed max (Mbps) 300
Output for an external antenna no
TX Power regulation yes
Max. output power (dBm) 26
Sensitivity (dBm) -94
Encryption WPA-AES, WPA2-AES
LAN port 1x RJ45 10/100Mbps
Mounting kit for mast
Gain (dBi) 19
Polarization Horizontal and vertical
Procesor Atheros MIPS 74KC, 560 MHz
RAM (MB) 64
NAND (MB) 8
Weight (kg) 0,53
IPv6 support Transparent (BRIDGE mode)
Height (mm) 189
Width (mm) 189
Depth (mm) 125
Min. operating temperature (°C) -40
Max. operating temperature (°C) 70